Posted in MMC L200

P1275 – Supply Pump Exchange MMC L200 IV

 Posted by  Posted on September 29, 2020

FUNCTION

  • The engine-ECU monitors the signals input from the rail pressure sensor.
  • Based on these input signals, the engine-ECU checks whether the fuel pressure in the common rail is abnormal.

    • TROUBLE JUDGMENT

  • Engine is running
  • Rail pressure sensor is normal
  • The rail pressure continues to exceed the maximum operating pressure of the supply pump for 15 seconds.

    • PROBABLE CAUSES

  • Failed supply pump
  • Failed rail pressure sensor
  • Failed engine-ECU

    • DIAGNOSIS PROCEDURE

    STEP 1. M.U.T.-III diagnosis code

    Q. Is any other diagnosis code than P1275 set?

    STEP 2. Check suction control valve itself

    Q. Is the check result normal?

    STEP 3. Replace the supply pump.

  • After learning the supply pump, re-check the trouble symptoms.

    • Q. Does trouble symptom persist?

    STEP 4. Replace the common rail assembly and fuel injection tubes.

  • After replacing the common rail assembly and fuel injection tubes, re-check the trouble symptoms.

    • Q. Does trouble symptom persist?

    Author: admin