Posted in MMC L200

P0652 – Analog Sensor Reference Voltage No. 2 Too Low MMC L200 IV

 Posted by  Posted on September 29, 2020

FUNCTION

  • The engine-ECU applies 5 V to the sensors other than the accelerator pedal position sensor (main)
  • The engine-ECU checks whether the supply voltage is within the specified range.

    • TROUBLE JUDGEMENT

  • Battery positive voltage is 8 – 16 V
  • 2 seconds later after the ignition switch has been in “ON” position or the engine has started up
  • The detected voltage of analog sensor reference voltage No. 2 is 4.86 V or less for 0.5 second. [Power supply for other than accelerator pedal position sensor (main)]

    • PROBABLE CAUSE

  • Failed engine-ECU

    • DIAGNOSIS PROCEDURE

    STEP 1. M.U.T.-III diagnosis code

  • After erasing the diagnosis code through M.U.T.-III, ignition switch is “ON” position and confirm whether the diagnosis code is stored.

    • Q. Is the diagnosis code stored?

    Author: admin